ECD Design Team Focus on New Release – Susan’s Garden

Susanfocus1

Today members of ECD Design Team are doing another focus day and today it is for Susan’s Garden’s new release which consists of 8 dies.  You are going to love them!

For my card today I have chosen to use 3 of the new release Galvanized Bucket, Forsythia and Frosty Fern.  Sentiment is from Joset’s Words 1 – Celebration set.

Be sure to visit Elizabeth Craft Designs Blog to see what other team members have created with this new release for Susan’s Garden.

Here is how I created my card.

Step 1  Using 3 Distress Oxide Reinkers (Peeled Paint, Fossilized Amber and Worn Lipstick used here) put 3 drops of of peeled paint, 3 drops of fossilized amber and 1 drop of worn lipstick onto non stick craft mat spritz with water take 5″ X 8-1/4″ white Soft Finish Cardstock spritz with water then tap into ink lift and tap again drying in between continue until piece is covered and to your liking.  Cut to 5″ X 7″ taking remaining piece add Clear Double Sided Adhesive to back die cut “happy birthday” then cut again from black cardstock with Clear Double Sided Adhesive on back place colored piece on top of black.

Step 2  Cut 5-6 pieces of Garden Notes – Frosty Fern from green cardstock.  Using white Nuvo Drops add a little to each tip of fern Do Not do berries you want the white flat.  Set aside to dry.  Pinch up on fronds to give dimension.

Step 3  Using Garden Notes Forsythia die cut flowers from yellow cardstock, stems from brown and leaves from green.  I cut 2 plates of flowers for each stem I cut 4 sets of stems (2 stems per set)  Using green Copic marker add dot to center of each flower lay right side down on molding mat use small loop tool from Susan’s Garden 4 pc. All Metal Tool Kit shape each petal by pulling tool from tip to center of each petal.  Turn over use medium ball tool from tool kit push into center to cup.  Using Kids Choice Glue add flowers to stems.  Shape and shade leaves add to stems.

Step 4  Using Garden Notes – Galvanized Bucket die set cut 2 buckets and handles from gray cardstock 1 with Clear Double Sided Adhesive on back adhere 1 to other same with handle.  Cut 2 of wooden grip from light brown cardstock.  To do galvanizing see Susan’s video on her Facebook page Susan’s Garden Club found here.  I got a little heavy with black marker so it looks more cast iron then it does galvanized.

Step 5  Form 5″ X 7″ card base from white Soft Finish Cardstock.

Step 6  Cut white Soft Finish Cardstock 5″ X 7″ using largest Fitted Rectangle die set cut opening placing die approximately 1″ from bottom.

Step 7  Build your card.  Adhere background piece to card front using Clear Double Sided Adhesive.  Adhere piece with opening to front of card.  Take bucket pinch sides with fingers to give a little curve add a couple pieces of dimensional tape in center add Kids Choice Glue around outer edge of bucket making sure not to glue top opening of bucket as you will want to put your stems down through that opening.  Add handle using Kids Choice Glue to adhere.  Arrange stems and ferns adhering with Kids Choice Glue.  Finally add happy birthday to bottom of card using Kids Choice Glue.

Hope that you have enjoyed this tutorial today and be sure to visit Elizabeth Craft Designs Blog.  You can purchase supplies by clicking on any of the supply pictures below it will take you to Elizabeth Craft Designs.

Until next time – Happy Crafting!

Christine

Elizabeth Craft Designs Supplies

Other Supplies

Cardstock – yellow, green, brown, gray brown, black

Distress Inks – Peeled Paint, Fossilized Amber, Worn Lipstick

Nuvo Crystal Drops – white

ECD Glitter Challenge

glitterchallenge1

Hello My Crafty Friends,

Once again it is time for another Design Team Challenge this month the challenge is All That Glitters challenging us to use one of the 3 new palettes of Silk Microfine Glitter just released.  The three palettes are Bloom (which I have used), Beach and Earth each has 5 colors.

Be sure to go to Elizabeth Craft Designs Blog to see all the creations by our Design Team and enter for a chance to win. 

For today’s challenge Elizabeth Craft Designs are giving away a $20 Gift Card to use on our website to 3 winners

To enter simply leave a comment on the Elizabeth Craft Designs Facebook Giveaway Blog Post or the Elizabeth Craft Designs Challenge post and tell us Which of the new Silk Microfine Glitter Palettes is your favorite, Earth, Beach or Bloom?

We will select 3 lucky winners in a random drawing 

The winners will be announced on Friday, May 18th on the Elizabeth Craft Designs blog and our Facebook page.


Here is how my card was created.

Step 1  Form tent fold card base 5″ X 6″ from white cardstock.

Step 2  Cover 6″ square piece of cardstock with Clear Double Sided Adhesive.  Decide the order you want your colors to go in then start tearing  (no measuring ) 1 strip of protective adhesive off exposing adhesive sprinkle on Silk Microfine Glitter tap off excess burnish in using your finger.  Make sure to burnish each color before moving on.  Repeat process with each color until entire piece is covered.  Using largest Stitched Fishtail die to cut the piece,  My strips I did on diagonal but you could also do vertical or horizontal.  When exposing adhesive be very careful not to get your fingers in it.

Step 3  Adhere Fishtail to card front using Clear Double Sided Adhesive.

Step 4  From black cardstock with Clear Double Sided Adhesive on back die cut 2 “hello” using die from Joset’s Words 2 – Thinking of You set.  Adhere to bottom of card front.

Step 5  From white Soft Finish Cardstock create Garden Notes “Love In The Mist”.  Susan has a video to help with this on her Facebook Susan’s Garden Club at this link.

Now it is your turn to try making some art with Silk Microfine Glitter.

Be sure to go to Elizabeth Craft Designs Blog to see what the rest of the Design Team has created using the new palettes of Silk Microfine Glitter and be sure to comment for a chance to win a $20.00 Gift Certificate.

Thanks for stopping by today and until next time – Happy Crafting!

Christine

 

 


Joset’s New Release Backyard Barbecue

josetrel252018

Hello My Crafty Friends!

Here is a second card I did using one of Joset’s new releases the Backyard Barbecue and Lanterns.  I had just seen the Impossible Card and when I saw the BBQ set and the Lanterns I knew I had to make this card.

Step 1  For how to video on making the card base go to this LINK

Step 2  Cut off white cardstock 3-1/2″ X 4-1/4″ emboss with “Brick” embossing folder.  Using Clear Double Sided Adhesive adhere to center pop up section.

Step 3  Die cut all pieces you wish to use on your card using Joset’s newly released Backyard Barbecue and Lanterns die sets.  For picnic table use 1/4″ strips of brown cardstock.  Using Clear Double Sided Adhesive build your card scene.

Step 4  Using A Way With Words – 4 Seasons die set cut Summer 1 from green cardstock with Clear Double Sided Adhesive on back and 1 from off white cardstock.  Adhere green on top of off white off setting a bit to give shadow effect.

I do hope you have enjoyed.  Thank you for stopping by.

Be sure to check out Elizabeth Craft Designs Blog  at this LINK to see what other Design Team Members have come up with using Joset’s new releases.

Thanks for stopping by today and until next time – Happy Crafting!

Christine

 

ECD Design Team Focus on New Releases for Joset

josetrel152018

Hello My Crafty Friends,

Today the ECD Design Team is focusing on Joset’s new releases now available at Elizabeth Craft Designs.  I have chosen to use her new Stitched Hexagons.

Here is how I made the card.

Step 1  Cut 1 set of Garden Notes – Leafy Berry Branch from green cardstock.  Lay right side down on Molding Mat using medium ball tool from Susan’s Garden 4 pc. All Metal Tool Kit rub back of each leaf.  Using Nuvo Crystal Drops add berries set aside to dry.

Step 2  Form 6 X 6 tent fold card from white cardstock.  Using Joset’s largest Stitched Hexagon die lay onto card base with top cutting edge just above fold then die cut. (see photos)

Step 3  Using largest Hexagon die and patterned paper cut 1 hexagon.  Adhere to card front using Clear Double Sided Adhesive.

Step 4    Using 2 largest hexagon dies cut frame from white Soft Finish Cardstock with Clear Double Sided Adhesive on back.  (see photo)  Adhere to card front.

josetrel1e52018

Step 5  From White Soft Finish Cardstock using Garden Notes – Primrose 1 cut nine flowers.  Color with alcohol markers. (Note: you can use colored cardstock if you are not into coloring.)  To shape and assemble see Susan’s video found at this LINK.

Step 6  Cut white Soft Finish Cardstock 1″ X 6″ round corners stamp with sentiment.  This sentiment is from set – Little Words That Mean A Lot.  Adhere to lower portion of card using dimensional tape.

Step 7  Arrange your flowers and berry branches on card front using Kids Choice Glue.

To purchase any of the Elizabeth Craft Designs products used today just click on them below.  Be sure to check out Elizabeth Craft Designs Blog  at this LINK to see what other Design Team members have created with Joset’s new releases.

ECD Supplies


Other Supplies

Black Ink

Nuvo Crystal Drops

Copic Markers

Hope that you have enjoyed my card today.  Be sure to check out the new releases at Elizabeth craft Designs.

Thanks for stopping by today!

Until next time – Happy Crafting!

Christine